The new LED AC flexible Strip Light is rated IP67, which is perfect for outdoor lighting projects and can be directly connected to an existing 12V or 24VAC landscaping lighting system. As used CRI 90 high efficient LED chip, it can output great accent lighting for stairs, railing, and overhangs.
No more than 32' can be run in the same line. Having this said, for a 128' application, you would need to run 4 different lines of low-voltage wire.
Even though the strip light can be cut every 2", we recommend only cutting each strip light once. Since there is a lead wire on each end, if you cut the strip light once, you end up with 2 shorter strip lights. If you want to cut the same strip light for a second time, you would need to use a connector ( to give you lead wire to do the connection), which compromises the fixture & connection, and would not be covered by warranty. Having this said, if you have 4x 2' steps, we recommend using 2x 16 ft strip light.
Ideal for Illuminating round steps, patio table cabinets, and more. Easy to Install, stick the strip light to a dry, clean surface for use. 3M Strong adhesives and strong clips ensure your light will not fall or hang. Trim the strip light to desirable lengths to satisfy your DIY home lighting needs.
Specs & Features:
Color Temperature: 3000K-2700k
Wattage: 0.75W per ft
- FCC Compliant
Waterproof: Yes IP67
Dimensions: 3/8”x 16’ or 32'
Mounting: 3M Tape ( make sure to clean the surface beforehand)
- It can be cut every 4 inches
Max load: 32'
Wiring: Wire lead on both ends
-How To Cut And Install Outdoor Led Strip Lights-